Specification:
This machine is suitable for cutting, stripping and stripping multi-core sheathed cables and special single-core wires. The outer core wire is stripped at one time without secondary processing.
Features:
1. Touch the display screen, the operation is simple and convenient, and the work is more labor-saving (can switch between Chinese and English)
2. Wire feeding by belt pulley, no damage to the cable, no embossing on the outer skin, no scratches.
3. The pipe of the wire stripping machine can be replaced, so that when the wire passes through the pipe, it is in line with the center of the knife edge.
4. Equipped with an air filter to control the air pressure stability, filter the water produced by the air compressor, and improve the machine's endurance.
5. Equipped with a metal straight meter to straighten the wire, which improves the adhesion of the wire to a certain extent, so that the wire is not easily deformed and the wire is transported accurately.
6. The blade is made of high-quality stainless steel, the blade is sharp and durable.
Technical Parameters:
|
Model:
|
X-505HT
|
|
Dimensions:
|
594mm* 515mm*475mm
|
|
Weight:
|
52KG
|
|
Power supply:
|
220V/110V 50/60HZ
|
|
Power:
|
850W
|
|
Display:
|
Chinese and English operation interface can be switched mutually (using 7-inch touch screen)
|
|
Outer diameter of processed round sheath:
|
3-13 mm
|
|
Number of cores that can be processed:
|
2 cores, 3 cores, 4 cores, 5 cores
|
|
Air pressure:
|
0. 4Mpa
|
|
Maximum diameter of catheter:
|
￠15
|
|
Peeling precision:
|
±0.2mm
|
|
Cutting length:
|
Max.400 meter
|
|
Stripping length:
|
Head: 15-200mm, tail: 15-100mm
|
|
Wire core stripping length:
|
head :0-20mm, tail : 0-30mm
|
|
Blade material:
|
imported high-speed steel knife
|
|
Stripping speed:
|
600 pieces/hour (1000mm length as a unit)
|
|
Drive mode:
|
8-wheel drive, motor ball screw drive
|
Our machine advantages:
1. Our machine is a brand-new economical wire stripping machine with fast speed, high efficiency and stable performance. Most of the other manufacturers are old styles. The stripping machine has poor performance, slow speed and easy damage to the machine.
2. Our machine uses an upgraded version of 3 independent drives, but other manufacturers' machines do not.
4. The blade is made of imported high-quality steel, which is sharp and durable. Other manufacturers use low-quality steel, which is easy to damage and has poor cutting effect.
